Zmax Key Chains
Moderator: ZS Global Moderators
16 posts
• Page 1 of 1
Zmax Key Chains
by Gun_Nut_2k1 » Sat Apr 21, 2012 8:01 pm
I had a friend ask me to make him a Key Chain out of a Hornady Z max bullet. Here is the finished product. I use actual Hornady Z max zombie bullets on actual Nato stamped 5.56 or commercial .223 cases. I can do silver tone or brass chains. If you are interested in one I can do them for $6 each, or two or more for $5 each, which includes shipping. I can also do other cases and bullet combinations if interested.
Last edited by Gun_Nut_2k1 on Sun May 27, 2012 5:55 am, edited 1 time in total.
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Re: Zmax Key Chains
by Roguebama » Sat Apr 21, 2012 8:43 pm
Outstanding! That looks Great!!
Things can always get worse..... 
ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ-
Roguebama - ZS Member
- Posts: 81
- Joined: Tue Dec 27, 2011 6:30 pm
- Location: South Central Missouri
Re: Zmax Key Chains
by anungunrama » Sat Apr 21, 2012 9:16 pm
these are pretty sweet. pm inbound
ZSC:009 Financial Officer
"Don't gamble with your life, Be Prepared!"
__________________________________________________
"Don't gamble with your life, Be Prepared!"
__________________________________________________
-
anungunrama - ZS Donor
- Posts: 635
- Joined: Sat Jan 03, 2009 4:56 pm
- Location: Las Vegas, NV
Re: Zmax Key Chains
by Gun_Nut_2k1 » Sat Apr 21, 2012 10:39 pm
Wow! Thanks for the compliment guys. I wasn't sure there would be any interest, but I have already sold out of the ones I had made. They take about 2 min each to make so I will have a new batch tomorrow. Also one of you guys inspired me to make these as necklaces as well. The necklaces will only be $4 each. The member that inspired the necklace will be getting a little extra something in his order!
At this time I can only make the 5.56 Zmax key chains and necklaces. If I get enough interest in the 7.62 variants I will be happy to make those as well. Hornady only sells 500 round boxes of components as far as I have found. So to be cost effective I would need a reasonable order quantity. The available bullets for 7.62 are 123 grain variety. These will not make good shooting rounds but will look great as a novelty key chain.
At this time I can only make the 5.56 Zmax key chains and necklaces. If I get enough interest in the 7.62 variants I will be happy to make those as well. Hornady only sells 500 round boxes of components as far as I have found. So to be cost effective I would need a reasonable order quantity. The available bullets for 7.62 are 123 grain variety. These will not make good shooting rounds but will look great as a novelty key chain.
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Zmax Key Chains
by Roguebama » Fri May 04, 2012 3:08 pm
Just received my 2 Z-Max keychains and 2 necklaces. All I can say is WOW!!
They look awesome, perfectly made, and excellent quality!!!
And for the "gift" you sent me, I love them! Your leatherwork is excellent! You really need to put those out there to!
Thanks again!!!
They look awesome, perfectly made, and excellent quality!!!
And for the "gift" you sent me, I love them! Your leatherwork is excellent! You really need to put those out there to!
Thanks again!!!
Things can always get worse..... ΜΟΛΩΝ ΛΑΒΕ
ΜΟΛΩΝ ΛΑΒΕ-
Roguebama - ZS Member
- Posts: 81
- Joined: Tue Dec 27, 2011 6:30 pm
- Location: South Central Missouri
Re: Zmax Key Chains
by Gun_Nut_2k1 » Sat May 05, 2012 4:18 am
Again thanks guys. I do leather work. You can see my for sale post in the traders section. I am just doing these as a casual venture. Thanks again guys. I have to order more of all the parts to make these key chains. You guys have wiped me out. 
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Re: Zmax Key Chains
by Gun_Nut_2k1 » Sun May 27, 2012 5:54 am
I have another batch ready for production. Finally caught up with the deluge of orders, so shoot me an IM if you want one.
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Re: Zmax Key Chains
by Gun_Nut_2k1 » Sat Jun 30, 2012 3:54 pm
I still have these for sale. I have only 5 Nato stamped brass left. After those it will be polished commercial brass.
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Re: Zmax Key Chains
by Gun_Nut_2k1 » Thu Sep 06, 2012 5:04 am
I have in three nickle commercial cases for either a key chain or pendant. These will be $2 extra each, but the look very nice!
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Re: Zmax Key Chains
by US_Army_Z28 » Thu Sep 06, 2012 11:13 am
just wanted to thank you properly for the order i placed months ago, i love these keychains,
maldon007 wrote:
My thoughts are, super zombie, whatever it is, sounds stupid, and you should leave Storm Crow's thread before he forges your skull into something useful
-
US_Army_Z28 - ZS Member
- Posts: 317
- Joined: Fri Jun 01, 2012 8:31 pm
- Location: Gaffney, S.C.
Re: Zmax Key Chains
by Gun_Nut_2k1 » Fri Sep 07, 2012 2:35 am
It was my pleasure sir. Thank you for the order. 
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Zmax Key Chains
by TN-Shooter » Sat Sep 08, 2012 5:46 am
Very cool lookin'! I may be contacting you soon about buying a couple of these!
What if everyone was once a zombie but there was a human apocalypse?
-
TN-Shooter - ZS Member
- Posts: 242
- Joined: Thu Apr 07, 2011 6:53 pm
- Location: Dirty South
Re: Zmax Key Chains
by Gun_Nut_2k1 » Thu Oct 18, 2012 6:07 am
I will not be accepting new orders for these for the near futute. I will be unable to work in the reloading shop due to some surgery I have to have. Once I heal I may start taking orders again.
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
Zmax Key Chains
by TN-Shooter » Thu Oct 18, 2012 6:17 am
Hey sorry about my order not falling through. I got caught up in a bunch of things myself. Maybe next time! Get well!
What if everyone was once a zombie but there was a human apocalypse?
-
TN-Shooter - ZS Member
- Posts: 242
- Joined: Thu Apr 07, 2011 6:53 pm
- Location: Dirty South
Re: Zmax Key Chains
by Curtai » Thu Oct 18, 2012 2:34 pm
Interested just need to finalize a deal with someone else first... Will PM when I get it done
Pastryfish wrote:"...After this incident, I don't give a f*** if the factory magazines are made in North Korea, Iran, or Mexico
by-the-throat wrote:The bo staff isn't mall ninja fare until you mount a picatinny rail on it.
Brownies/Star Crunch/AR15
- Curtai
- * *
- Posts: 210
- Joined: Thu Jun 10, 2010 10:39 pm
Re: Zmax Key Chains
by Gun_Nut_2k1 » Thu Oct 18, 2012 3:28 pm
With respect sir or mam, I will be unable to accept any orders. At least for the next few months.
GN
Oneswunk wrote:Interesting idea, but I still prefer the feel of wood in my hands.
tarzan wrote:Not a sound argument for having wood, in my opinion.
Tommy Tran wrote:Before I drop hammer on a 'clear' SG I full finger both tubes!
-
Gun_Nut_2k1 - ZS Member
- Posts: 4174
- Joined: Thu Jun 22, 2006 6:03 am
- Location: Tucson, AZ
16 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests