My brand new bov 2011 pro 4x nissan xterra. more pic9/30/11

[darius379]

[YouTube][/YouTube]Prior to going into my anatomy lab I thought I would share pics of my new bov. I love seeing what people do with their vehicle's and seeing them. Here's a link to my album I can't figure out how to shrink my photos. Shows how dog carrier is attached also any questions or suggestions. Let me no http://m1097.photobucket.com/albums/dar ... t/?sa=true[YouTube][/YouTube]

[Tater Raider]

Nice rig and I absolutely love the cargo net. Can I get pics on how you rigged that thing?

[Pale_Horse]

Got one and love the thing...

Check out Raingler Nets for real nets for it...

[Paladin1]

Congrats on the new rig!

[HKTackDriver]

Beautiful truck, good luck with it!

[darius379]

http://www.thenewx.org/forum/showthread ... post266948


How to make lobotomies rack. Dog barrier 9.99 cargo net from Walmart. Runs above rack and coversitems on the rack.

[darius379]

Thanks everyone its got everything but leather. I despise leather in Chicago summer. Its got hill descent and locker gas Milages city 16-17. Sometimes 18. Ilooked at those raigner nets not for me the holes are to big. Lol

[Pale_Horse]

Ilooked at those raigner nets not for me the holes are to big. Lol

you carrying marbles? LOL

[Tater Raider]

Ilooked at those raigner nets not for me the holes are to big. Lol

you carrying marbles? LOL

I used to, but then I lost them.

[darius379]

LOL no marbles hear lost those along time ago. Sadly I dont see to many xterras on here. I really waiting for snow I hope its like last year. I was driving my trailblazer with custom lights and roof rack thru 3 feet of snow. This thing should be able to do it easy.

[darius379]

Ilooked at those raigner nets not for me the holes are to big. Lol

you carrying marbles? LOL

I m really just to cheap LOL. I love DIY stuff if I have directions I can build it.

[Invis]

Nice rig! I love my 09 SE and just started mods. Glad to see you hooked up with the Gen2 site...lots of great info there.

[darius379]

Nice rig! I love my 09 SE and just started mods. Glad to see you hooked up with the Gen2 site...lots of great info there.

Ya its a great site and I love this lobo. Rack its a nice little sit u. I'm thinking of building some aluminum legs with guides the fit in the tracks in the floor so it can slide back n forth.

[bluesquid]

I have a 2005 xterra and love it. She has had a few problems such as the blower motor that pushes heat into the cabin quitting when it was 30 below. But everything else was covered by Nissan.

Did you get the six speed or auto? people are always amazed how fast an xterra is with manual trans.

[darius379]

I have a 2005 xterra and love it. She has had a few problems such as the blower motor that pushes heat into the cabin quitting when it was 30 below. But everything else was covered by Nissan.

Did you get the six speed or auto? people are always amazed how fast an xterra is with manual trans.

I got auto I got an amazing deal so I took it. This things as faster if not faster than my TB. I really like it. I bought it 0 mil now 3400 in like a month LOL. Do u have pics on here of yours really would like to see what people have done to them especially cargo storage

[Pale_Horse]

http://www.thenewx.org/forum/showthread.php?t=38314

The last page where i list those channel nuts... I haven't posted pics yet, but you just drill a hole in the bottom of whatever container and can mount it right in the back to those channels...

[darius379]

http://www.thenewx.org/forum/showthread.php?t=38314

The last page where i list those channel nuts... I haven't posted pics yet, but you just drill a hole in the bottom of whatever container and can mount it right in the back to those channels...

Where did u get those? That's a great idea. I was thinking of mounting an aluminum frame to those and mounting a flat piece of plywood. Across the top. Ill draw a pic and take a picture. Those would work really well tho. Thanxs.

[Pale_Horse]

Here ya go...

http://www.mcmaster.com/

3580T33 Stud Nut for Strut Channel 3/8"-16 Thread Size, 1-3/8" Stud Length, with Spring today $6.30

90866A140 Zinc-Plated Steel Wing Nut 3/8"-16 Thread Size, 1-7/16" Wing Spread, Packs of 50 today $10.66

90131A103 Abrasion-Resistant Reinforced Rubber Washer 3/8" Screw Size, 1" OD, 1/8" Thick, Packs of 10 today $3.18

98023A031 Zinc & Yellow Grade 8 Steel Flat Washer SAE, 3/8" Screw Size, 13/16" OD, .05"-.08" Thick, Packs of 50 today $5.14

91102A760 Zinc-Plated Steel Split Lock Washer 3/8" Screw Size, .68" OD, .09" min Thick, Packs of 100 today $3.92

EDIT: Oh yeah, I wasn't knocking the do it yourself pet barrier, only thing being in an accident that barrier will F* your pet up. That's why I suggested the Raingler Net, it will definitely restrain your pet, without breakage, or possible impalement. That other barrier creates a hazard to both you and your pet. Just lookin out for you and your pet. (Pet mostly. LOL)

[Invis]

Before the off road lights went on.

[bluesquid]

I have a 2005 xterra and love it. She has had a few problems such as the blower motor that pushes heat into the cabin quitting when it was 30 below. But everything else was covered by Nissan.

Did you get the six speed or auto? people are always amazed how fast an xterra is with manual trans.

I got auto I got an amazing deal so I took it. This things as faster if not faster than my TB. I really like it. I bought it 0 mil now 3400 in like a month LOL. Do u have pics on here of yours really would like to see what people have done to them especially cargo storage

I havent modded the inside for storage. Bought my X primarily because of,






One I took on the beach, Outer Banks

[darius379]

Here ya go...

http://www.mcmaster.com/

3580T33 Stud Nut for Strut Channel 3/8"-16 Thread Size, 1-3/8" Stud Length, with Spring today $6.30

90866A140 Zinc-Plated Steel Wing Nut 3/8"-16 Thread Size, 1-7/16" Wing Spread, Packs of 50 today $10.66

90131A103 Abrasion-Resistant Reinforced Rubber Washer 3/8"



Screw Size, 1" OD, 1/8" Thick, Packs of 10 today $3.18

No problem honestly my dogs are like two feet high LOL. And only go
in the truck on trips. More of a o crap gotta stop quick dont want my stuff hitting me in the head. I be got an actual pet barrier that's in storage that I will add as soon as I build the shelf. You go a great looking truck I almost got the night armor. Did u get leather?

98023A031 Zinc & Yellow Grade 8 Steel Flat Washer SAE, 3/8" Screw Size, 13/16" OD, .05"-.08" Thick, Packs of 50 today $5.14

91102A760 Zinc-Plated Steel Split Lock Washer 3/8" Screw Size, .68" OD, .09" min Thick, Packs of 100 today $3.92

EDIT: Oh yeah, I wasn't knocking the do it yourself pet barrier, only thing being in an accident that barrier will F* your pet up. That's why I suggested the Raingler Net, it will definitely restrain your pet, without breakage, or possible impalement. That other barrier creates a hazard to both you and your pet. Just lookin out for you and your pet. (Pet mostly. LOL)

[darius379]

[quote="Invis"]Before the off road lights went on.

[/quot
Love these xterras I have the lights but how did u install them or did u get the idea from newx

[darius379]

I have a 2005 xterra and love it. She has had a few problems such as the blower motor that pushes heat into the cabin quitting when it was 30 below. But everything else was covered by Nissan.

Did you get the six speed or auto? people are always amazed how fast an xterra is with manual trans.

I got auto I got an amazing deal so I took it. This things as faster if not







faster than my TB. I really like it. I bought it 0 mil now 3400 in like a month LOL. Do u have pics on here of yours really would like to see what people have done to them especially cargo storage

I havent modded the inside for storage. Bought my X primarily because of,



[url=http://s250.photobucket.com/albums/gg246/bluesquid_photobuckethats great. I wish we had snow like that all winter. I have heard on some YouTube videos that they suck in snow. From what I be seen its. People with no idea how to drive in deep snow. My question for you is what are your experiences.










action=view&current=IMAG0307.jpg][/url]




One I took on the beach, Outer Banks

[bluesquid]

We get a ton of snow most winters. We probably had a record amount last year. i luuuve driving in it.

I have a ton of experience driving in it, living up here in NY most my driving life. The x is great for snow in most regards. It will go through deep snow or slush very nicely. It will climb snow covered hills easily. The only place it suffers, is driving at speed on slightly snowy roads or when you encounter ice. Thats all cars for the most part but the x as you know, has such a high center of gravity.

I had a 96 pathfinder before my X. Was great in the snow in every way. If you started to lose control, it was very easy to recover. You cant "feel" the x in snow quite as well as many cars. Some say that adding skid plates to the bottom helps to give you that added stability. Lowering the center of gravity. I might try it.

So, you just have to be careful when mixing speed and slick. If your X "goes" it might not come back. Having said that I have never had it "go', but Im careful. If your careful you can do anything with it. A couple of years ago, right before x mas, I drove from my town to Syracuse during a snow storm. The snow was about 2 feet deep on the road. i couldnt see the road, nor get my bearings. i experienced vertigo a number of times. Sometimes its featureless outside in the dark, and its snowing so hard you lose sense of direction. very scary. i just took my time and found my way. The X was awesome.