Break Free CLP question

General discussions regarding topics that aren't covered in one of the other sub-forums. NO DISCUSSION OF POLITICS!

Moderators: ZS Global Moderators, ZS Postal Match Officers

Post Reply
User avatar
paul_c
ZS Donor
ZS Donor
Posts: 78
Joined: Wed May 08, 2013 10:57 am

Break Free CLP question

Post by paul_c » Thu May 23, 2013 12:36 pm

does it go bad? I'm no cheapo but I have some real "vintage" CLP (from the 1990s). Anyone know if this goes bad? I'd like to use it up. Thanks!

ssdtopgun
*
Posts: 34
Joined: Fri May 03, 2013 2:37 pm
Location: Idaho

Re: Break Free CLP question

Post by ssdtopgun » Thu May 23, 2013 12:59 pm

I would imagine worst case the propellent in the can will have leaked out by now and it may not spray.

User avatar
paul_c
ZS Donor
ZS Donor
Posts: 78
Joined: Wed May 08, 2013 10:57 am

Re: Break Free CLP question

Post by paul_c » Thu May 23, 2013 1:07 pm

ssdtopgun wrote:I would imagine worst case the propellent in the can will have leaked out by now and it may not spray.
I have the squeeze bottle so maybe I'm good to go

ssdtopgun
*
Posts: 34
Joined: Fri May 03, 2013 2:37 pm
Location: Idaho

Re: Break Free CLP question

Post by ssdtopgun » Thu May 23, 2013 1:10 pm

Give it a try and see if it still cleans and lubricates. I think I would squirt some out and check the consistency and make sure its not separated or thickened.

Worst case it just won't work or makes a mess.

User avatar
400 Grains
* * * * *
Posts: 1110
Joined: Wed Nov 03, 2010 11:30 pm

Re: Break Free CLP question

Post by 400 Grains » Fri May 24, 2013 9:27 am

It'll be fine.

Post Reply

Return to “General Firearms Discussion”