Search found 26 matches

by ssdtopgun
Sat Aug 19, 2017 8:55 pm
Forum: Bug Out Gear
Topic: Gas masks
Replies: 9
Views: 1133

Re: Gas masks

look, im not american and work in a prison. It fuckin' hurts inhale gas(and causes a big trouble) while you are trying to not get stabbed with a sharpened spoon or toothbrush(seriously), and the masks that we have in the job are 15+ years old(some are older then me). Since im thinking in buying one...
by ssdtopgun
Fri Aug 18, 2017 9:59 am
Forum: Bug Out Gear
Topic: Gas masks
Replies: 9
Views: 1133

Re: Gas masks

Just curious, why a gas mask? Other than chemical agents like tear gas or pepper spray what systems would you have in place to let you know you need the mask? Military and law enforcement have procedures and early warning systems to tell them to deploy a mask. You can't live in a gas mask long term....
by ssdtopgun
Mon Jun 26, 2017 9:58 am
Forum: General Firearms Discussion
Topic: Holster for Glock 35 that protects the muzzle?
Replies: 8
Views: 730

Re: Holster for Glock 35 that protects the muzzle?

I would suggest that you take a look at an inside the waistband holster. Check out anything from Crossbreed bolsters.

Enjoy
by ssdtopgun
Sat Jun 17, 2017 6:23 pm
Forum: Longarms - Shotguns and Rifles
Topic: Lower parts kit question
Replies: 32
Views: 1836

Re: Lower parts kit question

Sorry, thought keep rolling in. If you haven’t actually already purchased your AR lower here is a link to a complete kit with every part you need to build a complete AR15 all in one box. http://www.brownells.com/rifle-parts/receiver-parts/receivers/lower-receivers/ar-15-receiver-set-w-lower-parts-ki...
by ssdtopgun
Sat Jun 17, 2017 6:17 pm
Forum: Longarms - Shotguns and Rifles
Topic: Lower parts kit question
Replies: 32
Views: 1836

Re: Lower parts kit question

One other thought. Keep in mind you will need a small hammer and a punch set to complete the lower. If you don't have one or don't know anyone that you can borrow them from you can use the ones in the following links: 8 oz. Ball Pein Hammer https://www.harborfreight.com/8-oz-stubby-ball-pein-hammer-...
by ssdtopgun
Sat Jun 17, 2017 6:10 pm
Forum: Longarms - Shotguns and Rifles
Topic: Lower parts kit question
Replies: 32
Views: 1836

Re: Lower parts kit question

Some if the parts you will choose depend on what type of complete AR you are looking to complete. Do you want a carbine length rifle? Or will you want a longer barrel to complete a full rifle length AR? Below are the basic parts to complete your lower for a carbine. Brownells is having a sale this w...
by ssdtopgun
Fri Jun 02, 2017 1:25 pm
Forum: Longarms - Shotguns and Rifles
Topic: Weight of various shotgun shells, in grams per cartridge
Replies: 11
Views: 782

Re: Weight of various shotgun shells, in grams per cartridge

Just curious, what is the purpose of determining the weight of these shells?
by ssdtopgun
Wed May 31, 2017 10:20 pm
Forum: Handguns
Topic: topic closed
Replies: 32
Views: 3398

Re: How full is YOUR magazine?

For what it's worth I worked in law enforcement for 18.5 years. Carried fully loaded 18 round magazines everyday. Cycled out the ammo and filled them back up during range qualification. Still have the same exact magazines and I have never had to change a single spring, follower, floor plate or magaz...
by ssdtopgun
Sun May 21, 2017 4:28 pm
Forum: First Aid
Topic: Ticks
Replies: 16
Views: 3615

Re: Ticks

Just curious if you have considered treating your clothing with something like permethrin? If you are regularly venturing into area prone to ticks this can be an effective repellent.
by ssdtopgun
Sat Apr 22, 2017 11:13 am
Forum: Communications
Topic: Help with programming issue, Yaesu VX-5r and CHIRP
Replies: 3
Views: 1616

Re: Help with programming issue, Yaesu VX-5r and CHIRP

There are a lot of variables in play here we would need more detail to help diagnos the issue.

What version of CHIP and Mac OS are you using?

Are you using a Yeasu cable or a generic third party? If you are not using a Yeasu cable what make and model cable are you using?
by ssdtopgun
Thu Oct 13, 2016 10:23 am
Forum: Communications
Topic: cheap 20 watt portable Chinese HF rig
Replies: 8
Views: 2535

Re: cheap 20 watt portable Chinese HF rig

I realize it's a 20W rig but for the price I would really suggest people save up a few more dollars and get an Elecraft KX2. A good antenna with a quality feedline makes all the difference. I have a KX3 and can reach all four corners of the continental United States with a Chameleon Mil-wip antenna...
by ssdtopgun
Wed Oct 12, 2016 11:15 am
Forum: Communications
Topic: cheap 20 watt portable Chinese HF rig
Replies: 8
Views: 2535

Re: cheap 20 watt portable Chinese HF rig

I realize it's a 20W rig but for the price I would really suggest people save up a few more dollars and get an Elecraft KX2. A good antenna with a quality feedline makes all the difference. I have a KX3 and can reach all four corners of the continental United States with a Chameleon Mil-wip antenna ...
by ssdtopgun
Sat Oct 01, 2016 1:24 pm
Forum: Communications
Topic: "Militia" Comms
Replies: 16
Views: 3378

Re: "Militia" Comms

Below is a link to the system that Jack Spirko has mentioned on his show. I have also seen articles on the SurvivalBlog about these sensors. I have not used them myself but I have heard and read a lot of good things about them. They make several sensors for detecting different types of activity such...
by ssdtopgun
Fri Aug 26, 2016 4:15 pm
Forum: Handguns
Topic: For Sale - 80% 1911 Frames / Jig
Replies: 1
Views: 725

Re: For Sale - 80% 1911 Frames / Jig

SOLD.
by ssdtopgun
Sat Aug 20, 2016 3:30 pm
Forum: Handguns
Topic: For Sale - 80% 1911 Frames / Jig
Replies: 1
Views: 725

For Sale - 80% 1911 Frames / Jig

NOTE: These are not complete 1911 frames. These frames require additional work to be complete. For Sale: I have two 1911 Tactical Machining 80 percent frames and jig for sale. The frames are brand new and have not had any work performed on them. One of the frames is still in the original packaging t...
by ssdtopgun
Wed Aug 03, 2016 9:23 am
Forum: Introductions
Topic: Hello from Colorful Colorado
Replies: 4
Views: 649

Re: Hello from Colorful Colorado

Hey there, what part of Colorado are you from? I live just south east of the Denver area. Myself and a few other people have been trying to get a casual group together to talk about being more prepared, life, world events or what ever comes up. Left us know if you are interested. We have been meetin...
by ssdtopgun
Tue Aug 02, 2016 5:16 pm
Forum: Communications
Topic: HF QRP Transceivers
Replies: 6
Views: 1013

Re: HF QRP Transceivers

The Elecraft K line of QRP radios are great. I have built the original K2, KX1 and the KX3. These are some of the best QRP radios you can get.

http://www.elecraft.com

I see you mentioned you are not allowed to build the radio but what about someone else building the radio for you?
by ssdtopgun
Thu Aug 22, 2013 11:39 pm
Forum: Other Gear
Topic: Thoughts on Trail Camera's?
Replies: 9
Views: 1547

Re: Thoughts on Trail Camera's?

While I do not have any of the specific models that you have listed. I do have game cameras from each of those manufactures. The best advice I can give you on game camera's is that you do tend to get what you pay for to a certain point.
by ssdtopgun
Sun Jul 21, 2013 2:21 am
Forum: Bug Out Gear
Topic: what could i get
Replies: 7
Views: 599

Re: what could i get

Whats the budget amount?
by ssdtopgun
Tue May 28, 2013 5:20 pm
Forum: General Firearms Discussion
Topic: Press therapy - reloading room *chat*
Replies: 1189
Views: 90900

Re: Press therapy - reloading room *chat*

I had read many forum posts saying no need to trim pistol brass but then read several others that said yes do it. I figured since not all the brass came from my gun that some may have stretched and turns out that some did. A few the boy didn't get the primer set quite all the way in so just using t...
by ssdtopgun
Mon May 27, 2013 11:15 pm
Forum: General Firearms Discussion
Topic: Pay it Forward - Firearm parts and accessories
Replies: 376
Views: 51050

Re: Pay it Forward - Firearm parts and accessories

I have three Lee 4 hole classic turret press turrets that are free to a good home for anyone that is willing to pay the shipping.

Below is a link to MidwayUSA's site with a full description of the turrets:
http://www.midwayusa.com/product/292460 ... ess-turret
by ssdtopgun
Thu May 23, 2013 1:10 pm
Forum: General Firearms Discussion
Topic: Break Free CLP question
Replies: 4
Views: 372

Re: Break Free CLP question

Give it a try and see if it still cleans and lubricates. I think I would squirt some out and check the consistency and make sure its not separated or thickened.

Worst case it just won't work or makes a mess.
by ssdtopgun
Thu May 23, 2013 12:59 pm
Forum: General Firearms Discussion
Topic: Break Free CLP question
Replies: 4
Views: 372

Re: Break Free CLP question

I would imagine worst case the propellent in the can will have leaked out by now and it may not spray.
by ssdtopgun
Wed May 22, 2013 2:46 pm
Forum: General Firearms Discussion
Topic: Finding reloading components...
Replies: 20
Views: 2158

Finding reloading components...

Just curious to see what everyone is looking for with respect to reloading components.

What seems to be the items you are having the most trouble finding? Brass, bullets, powder, primers, dies, etc.

Go to advanced search