Search found 131 matches

by CoTTer
Fri Nov 22, 2013 4:45 pm
Forum: Other Weapons
Topic: Knife Polishing help.
Replies: 9
Views: 1278

Re: Knife Polishing help.

While I think manual polishing is the way to go unless you have a buffing rotary tool (Dremel, bench buffer, drill, etc.), just be careful with said technique. Besides the obvious of making sure you get to keep your fingers intact, remember the motion of the polishing pad/leather/whatever should be...
by CoTTer
Fri Nov 22, 2013 2:41 pm
Forum: Other Weapons
Topic: Knife Polishing help.
Replies: 9
Views: 1278

Re: Knife Polishing help.

I got the finish off the knife (I just used paint thinner, then used a razor to get it off) well I find out that there was some deep scratch marks, that were left over from the belt sander from the factory, so I am gonna have to sand that off first. So far many thanks for the help guys. This knife w...
by CoTTer
Fri Nov 22, 2013 12:00 pm
Forum: Other Weapons
Topic: Knife Polishing help.
Replies: 9
Views: 1278

Knife Polishing help.

Sorry if this is in the wrong section, was not sure if I should post it here, or else where. So I got a BK2 knife, after much use, the finish has finally come off.....Well I would like to be able to put a mirror image polish on it. Not sure how to do so without a few things. Also just some info woul...
by CoTTer
Tue Aug 27, 2013 2:53 pm
Forum: Survival Experiences
Topic: PREP FAILURE: THE WALL OF SHAME
Replies: 413
Views: 70968

Re: PREP FAILURE: THE WALL OF SHAME

Was laying in my bed the other night trying to sleep, while I lay there and had my thoughts run wild through my head (Bills and all that jazz) I heard a crashing sound come from my living room. I first thought it was the dog, but the dog was laying on my bed, so I instantly went with intruder. I go ...
by CoTTer
Tue Aug 13, 2013 5:32 pm
Forum: Contingency Planning & Preparation
Topic: What Did You Do Today To Prepare?
Replies: 6804
Views: 347909

Re: What Did You Do Today To Prepare?

Worked out, now benching 260 for 4 sets of 8-10 reps.
Also bought 500 rounds of 22lr.
by CoTTer
Tue Aug 13, 2013 4:33 am
Forum: Contingency Planning & Preparation
Topic: Workout of the Day
Replies: 1209
Views: 72734

Re: Workout of the Day

My work out routine. I usually get each work out done in like 45 mins, I will go through it once more, so really doing 6-8 sets of stuff. This work out, as well as healthy eating has helped a lot in my weight. I use to weigh 370 about 9 months ago, I am now down to 267. Can't wait to drop down anoth...
by CoTTer
Sat Aug 11, 2012 4:04 pm
Forum: ZSC:005
Topic: ZSC:005 LOCAL TRADING POST
Replies: 75
Views: 20297

Re: ZSC:005 LOCAL TRADING POST

I have a plate carrier by london bridge trading company, I put up an ad on CL, but I decided to see if any one on here might want it. The plate carrier is called LBT-6094A by London Bridge Trading Company. General Features -The ultimate in plate carrier performance -MOLLE web attachment points on en...
by CoTTer
Tue Jul 31, 2012 3:30 am
Forum: Other Weapons
Topic: One Knife to Rule Them All? (Photo Added)
Replies: 6
Views: 1277

Re: One Knife to Rule Them All? (Photo Added)

I like how the blade looks, but I prefer my BK2 as my belt knife, then my Ka Bar cutlass machete for my hacking tool. Both of which are amazing as hell.
by CoTTer
Tue Jul 31, 2012 12:39 am
Forum: Other Gear
Topic: need help on price.
Replies: 7
Views: 940

Re: need help on price.

I ended finding out one of the plates was cracked, trashed it seconds later. The second looked good, my friend bought it off of me for 30 bucks. My friend who bought it is actually brother to my friend who passed away, both in USAF. I am really diggin the carrier though.
by CoTTer
Sun Jul 29, 2012 9:18 am
Forum: Other Gear
Topic: need help on price.
Replies: 7
Views: 940

Re: need help on price.

http://lbtinc.com/vest-h-gear-carriers/ ... rrier.html" onclick="window.open(this.href);return false; This is the carrier the plates were in, never heard of this company before.
by CoTTer
Sun Jul 29, 2012 9:09 am
Forum: Other Gear
Topic: need help on price.
Replies: 7
Views: 940

Re: need help on price.

I really hope they`re not stolen, specially seeing who I got them from was in USAF. The date of being made is unknown to me, his wife said he bought them them around a year ago, shortly after he was diagnosed with lung cancer, so he never got to use them, they just sat around in his plate carrier un...
by CoTTer
Sun Jul 29, 2012 8:31 am
Forum: Other Gear
Topic: need help on price.
Replies: 7
Views: 940

need help on price.

I just came into possession of some plates from a friend, who recently passed away. I have no clue what these things go for, my google fu has been crap as of late. The only real info I got on them is this. Insert, esapi, medium size, 7.62 mm apm2 protection by a company called bae systems. Any one g...
by CoTTer
Wed May 09, 2012 4:15 am
Forum: Survival Experiences
Topic: 10 things being homeless will teach you
Replies: 23
Views: 3042

Re: 10 things being homeless will teach you

I JUST got done being homeless for a month, truth be told it was pretty nice month. I pretty much took it as a vacation, during that time hitch hiked around the great state of WA. Right when I became homeless, I went to the local DSHS like mins after it happen. I was able to get 250 bucks of food st...
by CoTTer
Fri Mar 09, 2012 4:53 am
Forum: Zombie Survival/Combat Simulations
Topic: Zombie infested 5k
Replies: 3
Views: 646

Re: Zombie infested 5k

I can't wait for it to come to WA. I am so going to do it, already taken time off of work for it and such.
by CoTTer
Mon Mar 05, 2012 8:05 am
Forum: Handguns
Topic: The walking dead.
Replies: 5
Views: 903

The walking dead.

I just caught the episode of the walking dead "Judge, Jury, Executioner" My question is, what is the name of the hand gun that Carl took from Daryl bike bag? Looks like a sweet gun, I would like info on it plz.
by CoTTer
Mon Feb 20, 2012 5:54 am
Forum: What Would You Do?
Topic: Worst places to be when TSHTF
Replies: 283
Views: 38422

Re: Worst places to be when TSHTF

My mother in law house, that woman can take a simple black out, turn it into worst situation every imagined. I would hate to see her in a PAW.
by CoTTer
Sun Feb 19, 2012 6:59 am
Forum: Zombie Combat Tactics
Topic: Zombie Weapons
Replies: 41
Views: 3852

Re: Zombie Weapons

1. Baseball Bat – Though a bat can be a good weapon, I don't see much use for it besides just bashing some thing in. I won't bother carrying this unless I truly needed. 2. Gun – A way to defend yourself, put food on the table, and kill some zeds, shit I will take this. 3. Crowbar/Tire Iron – If the ...
by CoTTer
Sat Feb 18, 2012 6:41 am
Forum: What Would You Do?
Topic: What would you do if you were bitten?
Replies: 35
Views: 2568

Re: What would you do if you were bitten?

I would have to find kevlar, I mean a lot of it, then I would make a full body suit out of it. I mean f head to toe, make a bullet proof glass face cover, that protected my eyes, then put on a protective helmet to protect my head. Then I would take two katana's, duct tape them to both arms, probabl...
by CoTTer
Sat Feb 18, 2012 6:10 am
Forum: What Would You Do?
Topic: What would you do if you were bitten?
Replies: 35
Views: 2568

Re: What would you do if you were bitten?

I would have to find kevlar, I mean a lot of it, then I would make a full body suit out of it. I mean f head to toe, make a bullet proof glass face cover, that protected my eyes, then put on a protective helmet to protect my head. Then I would take two katana's, duct tape them to both arms, probably...
by CoTTer
Sat Feb 18, 2012 1:59 am
Forum: What Would You Do?
Topic: So, what are you wearing...
Replies: 30
Views: 3178

Re: So, what are you wearing...

I use to ride a bike to work a few yrs ago, Due to lack of room, I had some of those steel type boxes, that attach on either side above the back tire. Seeing as they had a lock, I was able to store a decent amount of supplies in it. The job I have now requires me to drive a company truck I take home...
by CoTTer
Fri Feb 17, 2012 5:11 am
Forum: Contingency Planning & Preparation
Topic: Any advice on window bars?
Replies: 12
Views: 1310

Re: Any advice on window bars?

I always been pretty iffy about bars on the windows. First I thought they were an amazing idea, after what happen to my brother and bars on his windows made me think other wise. He had the bars that lock into place, when unlock they can be opened up, he just kept a simple pad lock on it. One night t...
by CoTTer
Thu Feb 16, 2012 5:23 pm
Forum: Longarms - Shotguns and Rifles
Topic: Shotgun barrel question.
Replies: 24
Views: 1317

Re: Shotgun barrel question.

Hey Cotter, take the barrel off, point the end of the mag tube at the floor with the threaded hole that the barrel screw turns into facing down, and shake vigorously. A small wooden dowel rod should be sticking out of the mag tube about now, give it a pull, it should have 2 "o rings" on the dowel r...
by CoTTer
Thu Feb 16, 2012 4:22 am
Forum: Survival Experiences
Topic: PREP FAILURE: THE WALL OF SHAME
Replies: 413
Views: 70968

Re: PREP FAILURE: THE WALL OF SHAME

Was at the local target a few weeks ago, during that really bad snow storm had. Well I am sitting on the toilet as I do my business, all of a sudden the lights go out (Find out later that power was out pretty much every where due to snow.) As I sit there and wonder wtf just happen, I notice that I a...

Go to advanced search